RB-40 Wing W/ 30 mil bladder

SKU: 30211
$334.00  
Out of Stock

Product Description

30 mil (.030 inches) Thick Bladders, Thickest Bladders Available!

Most wings use 12 mil, some use 15 mil, a few use 25 mil. No other brand of wings offers ultra thick 30 mil urethane bladders.

30 mil urethane RF welded inner bladder. Most wing bladders are .012 inches to .015 inches in thickness. At .030 inches (30 mil) DSS bladders offer improved resistance to impact damage.

Rugged Construction 1050 Ballistic Nylon Outer Shell, Sewn throughout with #138 Bonded Nylon thread, top stitched for extra seam strength.

One OPV or Rear Dump. Mounted on the diver's left, on the diver's side of the wing. Equipped with a knotted pull cord.

Designed specifically for Rebreathers this wing is NOT an OC doubles wing, or an OC Singles wing.

Short at ~ 23 inches and wider than any DSS singles wing, but not as wide as a Doubles wing the RB-40 provides 40 lbs of lift while providing good access to the tank valves.

The OPV is positioned far outboard. This position is free of interference and allows easy venting of all the gas in the wing.

The fill hose is offset 2 5/8 inches from the center. This has been demonstrated to work well with Meg's and Classic Kiss RB's

A Horseshoe design means there is no bladder in the bottom of the wing to be damaged from shorter canisters.

The large window in the center panel of this wing provides easy routing of hoses & adv's.

Furnished complete with 19 inch corrugated hose and 30 inch lp hose.
You may also like